Norco Range Yoke 2021 - Current
Available in 3x different options: DH 29/29, DH 29/27.5, or Enduro 29/27.5. All options maintain the stock geometry.
DH 29/29: Use a 225 x 75 shock for 200mm travel.
DH 29/27.5: Use a 225 x 75 for 206mm travel (or 72.5 for 200mm)
Enduro 29/27.5: Use stock shock (205 x 72.5): Increases travel to 176mm (ability to also run a 65mm stroke shock to achieve 182mm rear travel).
Increases Anti-Squat (more efficient pedaling)
Over 30mm of rearward axle path compared to 22.5mm as stock (and achieves 100% rearward axle path throughout all the travel).
Sits in the higher leverage portion of the stock leverage curve; translating into superior ground hugging abilities.
CNC’d from 6061-T6
Made in Australia
Enduro MAX 6900 bearings
*Note: Norco use a proprietary bashguard which is not compatible with this yoke as it fouls on the chainstay. We recommend using a standard type of bashguard (e13, etc) or use without a bashguard.
Available in 3x different options: DH 29/29, DH 29/27.5, or Enduro 29/27.5. All options maintain the stock geometry.
DH 29/29: Use a 225 x 75 shock for 200mm travel.
DH 29/27.5: Use a 225 x 75 for 206mm travel (or 72.5 for 200mm)
Enduro 29/27.5: Use stock shock (205 x 72.5): Increases travel to 176mm (ability to also run a 65mm stroke shock to achieve 182mm rear travel).
Increases Anti-Squat (more efficient pedaling)
Over 30mm of rearward axle path compared to 22.5mm as stock (and achieves 100% rearward axle path throughout all the travel).
Sits in the higher leverage portion of the stock leverage curve; translating into superior ground hugging abilities.
CNC’d from 6061-T6
Made in Australia
Enduro MAX 6900 bearings
*Note: Norco use a proprietary bashguard which is not compatible with this yoke as it fouls on the chainstay. We recommend using a standard type of bashguard (e13, etc) or use without a bashguard.
Available in 3x different options: DH 29/29, DH 29/27.5, or Enduro 29/27.5. All options maintain the stock geometry.
DH 29/29: Use a 225 x 75 shock for 200mm travel.
DH 29/27.5: Use a 225 x 75 for 206mm travel (or 72.5 for 200mm)
Enduro 29/27.5: Use stock shock (205 x 72.5): Increases travel to 176mm (ability to also run a 65mm stroke shock to achieve 182mm rear travel).
Increases Anti-Squat (more efficient pedaling)
Over 30mm of rearward axle path compared to 22.5mm as stock (and achieves 100% rearward axle path throughout all the travel).
Sits in the higher leverage portion of the stock leverage curve; translating into superior ground hugging abilities.
CNC’d from 6061-T6
Made in Australia
Enduro MAX 6900 bearings
*Note: Norco use a proprietary bashguard which is not compatible with this yoke as it fouls on the chainstay. We recommend using a standard type of bashguard (e13, etc) or use without a bashguard.